HP Deskjet 3635 does not work even with lights on

[Anonymous]

Hi. I am here to ask about an issue with my HP DeskJet 3635 printer. This evening, I plugged my printer in because I wanted to print. However, as I glance on the buttons, the POWER light is not on (but all the other lights are). Does this mean anything? I haven't seen anything like this and I can't seem to find that in the manual. Also, the LCD display is a blank screen (nothing shows up) and does not respond to plugging in my pc.

[TEJ1602]

@Anonymous, Welcome to HP Support Community!

The issue seems a little strange, but let us try to fix it. Follow the steps below-

Reset the printer-

1. Turn the printer on, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Unplug the power cord from the wall outlet.
5. Wait at least 60 seconds.
6. Plug the power cord back into the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

Try printing.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Anonymous]

Hi, unfortunately all of the steps do not work. I have attached a photo of the printer interface. The PC also does not recognize it as online, therefore barring the firmware update.

 

[Anonymous]

Here's a photo link https://imgur.com/a/Xk6hS46

[TEJ1602 · Accepted solution]

@Anonymous

This looks like a hardware issue.

Please reach out to the HP Support in your region regarding the service options for your printer.

Hope this helps!

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!