HP Deskjet Ink Advantage 3835 Incompatible Cartridges

[happykiddojes]

Last night, I bought an HP 680 black ink cartridge in of the malls here in the Philippines. After installing the new black ink to our printer, I got an error message "Incompatible Cartridges". The printer isn't connected to LAN, VPN  or wireless.
This is already my second replacement for the said ink but this is the first time I encountered the said error.
What should I do?

[Riddle_Decipher]

@happykiddojes (As long as you are happy, we are happy) 😉

Welcome to HP Forums, 

This is a great place to get support, find answers and tips, 

Thank you for posting your query, I'll be more than glad to help you out 🙂 

As I understand the printer has an error - "incompatible cartridges",

Don't worry as I'll be glad to help, however, to provide an accurate resolution, I need a few more details: 

• Did you ensure the cartridges are compatible with your printer?
• Have you attempted to remove, inspect and reseat the cartridge?

While you respond to that, here's what you need to do:

If the ink cartridges are not correctly installed, the printer might display an error.

   NOTE:

HP cannot guarantee the quality of remanufactured or refilled ink cartridges. Use genuine HP ink cartridges for good print quality.

1. If the printer is off, press the Power button to turn on the printer.

2. Close the output tray extender, and then push the output tray back into the printer.

   Figure : Close the output tray extender, and then push the output tray into the printer

   

3. Open the exterior door.

   Figure : Open the exterior door

   

4. Open the ink cartridge access door.

   The carriage moves to the center of the printer. Wait until the carriage is idle and silent before continuing.

   Figure : Open the ink cartridge access door

   

5. Press down on the ink cartridge to release it, and then pull the ink cartridge out to remove it from its slot.

   Figure : Remove the ink cartridge

   

      CAUTION:

   Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.

6. Remove any protective tape that still might be on the nozzles.

      CAUTION:

   Do not try to remove the copper electrical strip.

   Figure : Remove the plastic tape

   

7. Hold the ink cartridge by its sides with the nozzles toward the printer, and then insert the ink cartridge into its slot. Make sure that the ink cartridge is inserted in the correct slot.

   • The tri-color ink cartridge () goes in the slot on the left.

   • The black ink cartridge () goes in the slot on the right.

   Figure : Reinsert the ink cartridge

   

8. Push the ink cartridge forward into its slot until it snaps into place.

9. Repeat these steps to replace the other ink cartridge, if necessary.

10. Close the ink cartridge access door.

    Figure : Close the ink cartridge access door

    

11. Close the exterior door.

    Figure : Close the exterior door

    

If the error persists, continue to the next step.

Clean the ink cartridge contacts

If the ink cartridge contacts are dirty, the printer might display an ink cartridge error.

   CAUTION:

Clean the ink cartridges one at a time. Do not leave an ink cartridge outside the printer for more than 30 minutes.

1. Gather the following materials:

   • Dry foam-rubber swabs, lint-free cloth, or any soft material that does not come apart or leave fibers (coffee filters work well)

   • Distilled, filtered, or bottled water (tap water might contain contaminants that can damage the ink cartridges)

        CAUTION:

     Do not use platen cleaners or alcohol to clean the ink cartridge contacts. These can damage the ink cartridge or the printer.

2. Press the Power button to turn on the printer.

3. Close the output tray extender, and then push the output tray back into the printer.

   Figure : Close the output tray extender, and then push the output tray into the printer

   

4. Open the exterior door.

   Figure : Open the exterior door

   

5. Open the ink cartridge access door.

   The carriage moves to the center of the printer.

   Figure : Open the ink cartridge access door

   

6. Wait until the carriage is idle and silent before continuing.

7. Disconnect the power cord from the rear of the printer.

8. Disconnect the USB cable, unless your printer is connected to a wireless network.

9. Press down on the ink cartridge to release it, and then pull the ink cartridge out to remove it from its slot.

   Figure : Remove the ink cartridge

   

      CAUTION:

   Do not remove both ink cartridges at the same time. Remove and then clean each ink cartridge one at a time. Do not leave an ink cartridge outside the printer for more than 30 minutes.

10. Hold the ink cartridge by its sides.

    Figure : Hold the ink cartridge by its sides

    

11. Inspect the contacts for ink and debris buildup.

12. Wipe the contacts with a dry swab or other lint-free material until no debris remains on them.

       CAUTION:

    Be careful to wipe only the contacts. Do not smear any ink or debris elsewhere on the ink cartridge.

13. Dip a clean foam-rubber swab or lint-free cloth into distilled water, and then squeeze any excess water from it.

14. Clean only the copper-colored contacts, and then allow the ink cartridge to dry for approximately 10 minutes.

    Figure : Clean the contacts

    

15. Lightly moisten another foam-rubber swab with distilled water, and then squeeze any excess water from the swab.

16. Use the swab to clean the electrical contacts in the carriage, located inside the printer.

17. Clean the contacts in the carriage.

    Figure : The carriage contacts

    

18. Either let the ink cartridge sit for 10 minutes to allow the cleaned area to dry, or use a new swab to dry it.

       NOTE:

    Make sure that the ink cartridge is not left out of the printer for more than 30 minutes.

19. Hold the ink cartridge by its sides with the nozzles toward the printer, and then insert the ink cartridge into its slot. Make sure that the ink cartridge is inserted in the correct slot.

    Figure : Insert the ink cartridge into the slot

    

20. Push the ink cartridge forward into its slot until it snaps into place.

21. Repeat these steps to clean and then reinsert the other ink cartridge.

22. Close the ink cartridge access door.

    Figure : Close the ink cartridge access door

    

23. Close the exterior door.

    Figure : Close the exterior door

    

24. Reconnect the power cord to the rear of the printer.

25. Reconnect the USB cable, unless your printer is connected to a wireless network.

26. Press the Power button to turn on the printer if it does not turn on automatically.

If the error persists, continue to the next step.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: https://hp.care/2LujHfk - Step 4 Onward.

(By the end of this article all the issues should be resolved)

Keep me posted,

For I shall follow-up on this case to ensure the concern has been addressed, 

And your device is up and running again, 

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.