HP4632 Inkjet Printer's Admin Password = ?

[MisterOccupant]

What do I use for the default password in this picture? (The factory reset has been done.)

[MisterOccupant]

[asmita6658 · Accepted solution]

Hi @MisterOccupant

Welcome to the HP Support Community. 

Try these steps to restore the network settings to defaults - 

1. Press the Wireless button to access the Wireless Status menu.
2. Press the button next to Settings to access the Wireless Settings menu.
3. Select Restore Defaults.
4. Confirm the selection to restore defaults.

If the issue still persists, I have sent you a private message with the steps to reset the printer. Check next to your profile Name, you should see a little blue envelope, please click on it.  

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

[MisterOccupant]

I pressed on "Wireless" and then looked for  "Restore Defaults" at the bottom but it was absent. Then I tried your private message of turning on printer while slowly alternating pressing the UP button and HOME button, and then selected the selection you mentioned (Software Reset???) and it cycled off. When I powered it back on the "Restore Defaults" was there which I did. Then when I went online by putting the 192.168.x.x address into the browser, no password was required, and it could now be set thru the normal menu Password selection. Thanks!

[asmita6658]

@MisterOccupant

That's great! Happy to hear that. If you need further assistance feel free to reach out to us. 

Have a great day!