My Hp office jet pro 6978 is printing blank pages

[DeniseEbbitt]

My printer is printing blank pages. I have already reset the printer, checked and unclogged vents and cleaned the pin heads and still all the pages are blank.

[Riddle_Decipher]

@DeniseEbbitt  I recommend you try the copier as a stand-alone device without a computer and check if that works fine,

• If it doesn't work, this could be a hardware issue,
• however, if the copier works and yet, the print out from the computer doesn't work in color, you can try the below steps:

• Press "Windows key" + "r" to get the "Run" window.
• Type "services.msc" to get Services - Go to "Print spooler" - Right-click and "Stop" the service.
• Now again open "Run" - Type "spool" and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present. 
• Go to Control panel - Programs and feature - Select all the HP printer entries and uninstall them.
• Now go to Control panel - Devices and printer - Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type - "c:/programdata" - Go to the Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.

Then, use this link to access the HP website, find the drivers compatible with your windows and install it: CLICK HERE

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE

(By the end of this article all the issues should be resolved)

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

[DeniseEbbitt]

Spoiler
The copier did not print in black or color. Pages are all still blank 

[Riddle_Decipher]

@DeniseEbbitt In that case, the printhead could be clogged, and you might need to clean the printhead several times to restore print quality. Use an automated tool from the printer control panel to clean the printhead.

   CAUTION: 

Never turn off the printer when ink cartridges are not installed. To avoid issues that require cleaning the printhead or that can damage the ink system, always replace ink cartridges as soon as possible, and always turn off the printer using the Power button.

1. From the printer control panel, open the Setup  menu.

2. Open the Printer Maintenance menu.

3. If necessary, open the Tools menu, and then touch Clean Printhead.

   A test page prints.

   

4. Examine the test page.

   • If the print quality is unacceptable, touch Clean Again to continue the next level of cleaning. If necessary, repeat these steps for the third cleaning cycle.

     NOTE: 

     If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes before you perform all three levels of cleaning again.

   • If the print quality is acceptable, touch Done.

Try to print. If these steps resolved the issue, you do not need to continue troubleshooting.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 3 ONWARD

(By the end of this article all the issues should be resolved)

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!

[DeniseEbbitt]

I have cleaned my printer head about 6 times at this point and it is still not working. All blank pages. 

[Riddle_Decipher]

@DeniseEbbitt If issue persists, after following the steps suggested, including the ones you've mentioned as well, this could be a hardware malfunction and I suggest you talk to HP support and discuss your options, follow the below steps to get started:

1) Click on this link - http://www.hp.com/contacthp/

2) Click on Sign-in or select the product using the below step:

3) Enter the serial of your device.

4) Select the country from the drop-down.

5) Click on "Show Options".

Fill the web-form, to populate a case number and phone number for yourself!

Also, if you are having trouble navigating through the above options, it's most likely because the device is out of warranty, if yes? please send me a private message with the region you are contacting us from, 

here's how private messages work: Click here for details.

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.