• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
To resolve issues with 0xb90c05a4 error on your OfficeJet series: Click here to view.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
HP Recommended
HP Envy 5030
Microsoft Windows 10 (64-bit)

My printer keeps giving a paper out message even though there is paper in the printer.   I turn the printer off and then back on but this doesn't fix the issue.  The only thing that fixes this is to reboot my laptop.   This is a regular occurence so is becoming a problem. 

 

I have read through other solutions and followed some of the instructions such as check for updates.  My printer is completely up to date with no feed issues.  

 

Thank you in advance for any help. 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@Dee5001

 

Thank you for the update.

 

Test the printer and let me know if you face any other issue.

 

Cheers!

The_Fossette
I am an HP Employee

View solution in original post

3 REPLIES 3
HP Recommended

@Dee5001

 

I reviewed your post and I understand that you are getting out of paper error on the printer.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

I recommend you follow the below steps and check if it helps.

 

  1. With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. 
  2. Remove USB cable, if present. 
  3. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge. 
  4. Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer. 
  5. Turn on the printer and wait till warm-up period finishes and the printer is idle.

 

If you continue facing the issue, then follow the steps in the below article.

 

https://support.hp.com/us-en/product/hp-envy-5000-all-in-one-printer-series/14095644/model/14095720/...

 

Let me know how it goes and you have a great day!

 

P.S: Welcome to the HP Support Community 😊

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

Stay Home – Stay Safe

The_Fossette
I am an HP Employee

HP Recommended

Many thanks for your help.  I have marked as resolved but as the problem is intermittent I will be unsure if it has solved it yet.  I am very grateful for your help. 

HP Recommended

@Dee5001

 

Thank you for the update.

 

Test the printer and let me know if you face any other issue.

 

Cheers!

The_Fossette
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.