Printer not working, power button blinking rapidly

[ddteti]

Power button rapidly blinking, no other lights blinking.  Unable to press any buttons or turn off.  If you hold power button for a sec, it then blinks slower like it is about to start up then rapidly blinks again.  Unplugged for few minutes, did nothing.

[Kumar0307]

Hi @ddteti

Welcome to the HP Support Community. I'd be happy to assist you.

Let us try these steps to resolve this issue:

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Check for any jams inside the printer and make sure the print carriage is moving freely.

Refer to this document.

Kindly refer to this document to resolve any blinking light issues on the printer.

I hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!