Resend update m452dn

[sansthelavandil]

Recently i had 59.F0 error on my hp m452dn. I updated it with last firmware from site but it didn't fix it.  I found this post https://h30434.www3.hp.com/t5/Printing-Errors-or-Lights-Stuck-Print-Jobs/59-F0-Error-on-M452dn/td-p/... and saw that i have controller number 14600, then i follow this steps  but printer didn't reboot automatically, after 5 minutes i reboot it and now i have resend update on printer display. Installing firmware from pc M452_dn_nw_Series_FW_Update-20220530 don't fix it. Any ideas?

[Repairatrooper]

If you were showing 14600 after the update, it did not apply. The updated would show a 15100.  You can try extracting the .ful file from the update app and copying it to a USB stick and the  restarting the printer with the USB stick inserted. It should detect the update and auto install it. Or search for posts on the Ready 2 Download error and use the same method to fix it.

[sansthelavandil]

Thank you for reply, but what is update app? when i unzip M452_dn_nw_Series_FW_Update-20220530.exe I don't see any files with .ful extension. 

When we speaking about 2nd method(ready 2 download)  - my printer can recieve firmware from windows pc - i see on screen process of erasing and  programming it reboots 2 or 3 times but then loads in same error. 

And i want to clarify that when i had 59.F0 error, i could priint after 1-2  printer reboots, i have config reports printer where i see controller version 14600 but now - after sending through ftp DCCV1-51.prn i have access to al menus and web interface but i can't print anytiing( no test page or config report). Also i think that after first time i sent this file printer cooler changed it sound a bit.

[Repairatrooper]

You are correct, my bad, this firmware update file does not contain the necessary .FUL file. I have escalated your post requesting that someone try to locate the file for you. If you have access to the menus, try performing another factory reset on the printer.  Sorry for the incorrect information.

[sansthelavandil]

thank you for replies, i tried to reset it (no changes) and also tried to find updates from printer display - it's trying to find updates but told that no updates found.

[sansthelavandil · Accepted solution]

So i found solution for my printer - i googled several topics where other mention that you need to send file sometimes several times even 20+ to start update. This time i decided to try method 3 from pdf - through usb connection and network shared printer - and with first attempt it updated controller succesfully! Then I gave static ip to printer and for some reason it updated firmware 2 or 3 times - nothing was running on my pc but I thought that maybe some tasks from yesterday when i started firmware updates several times and sent file through ftp could still be in the air - I restarted pc and even disconnected it from lan. Anyway after several firmware installs printer calmed down and is working normally - I didn't see any errors on screen in 5 hours.