Shows error code 0XC4EB80000 WHLMICCI2 C

[Mmustaqi]

My printer HP DESKJET 3833 when I switch on it shows error code (  0XC4EB8000 WHLMICCI2 C )

What does it means? Or what is it's solutions?

[Kuroi_Kenshi]

Hi @Mmustaqi,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding your printer!

We're thrilled to have the opportunity to assist you and provide a solution.

Did you make any changes to your printer?

First, try updating the printer firmware and check if it helps.

Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

Try few steps recommended below.

In some cases, removing the ink cartridges and resetting the printer can clear the error message.
Turn on the printer.
Wait until the printer is idle and silent before you continue.
Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.
Remove the ink cartridges from the printer.
With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
Wait at least 60 seconds.
Plug the power cord back into the wall outlet.
   NOTE:
HP recommends connecting the printer power cord directly to a wall outlet.
Reconnect the power cord to the rear of the printer.
Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
Reinsert the ink cartridges, and then close the ink cartridge access door.
If you receive a prompt to print a calibration page, do so.
If you disconnected the USB cable, reconnect it to the rear of the printer.
Try to print.

If the issue still persists, it is a hardware issue with your printer. 

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,