Urgent — Request for original .RFU firmware file for HP LaserJet M211dw stuck in recovery mode

[mdragojlovic]

Dear Support Team,
I am experiencing an issue with my HP LaserJet M211dw printer, which is stuck in recovery mode — the printer continuously blinks an amber light and cannot boot normally. I have attempted all known button combinations and software tools to reset it, but without success.
To perform a firmware recovery, I urgently need the original .RFU firmware file for the HP LaserJet M211dw model (version 20250324 or the latest available). Unfortunately, I have been unable to locate this file on the official website or other sources.
Please assist me in obtaining the original .RFU firmware file or provide instructions on how to recover the firmware and reset the printer.
Thank you in advance for your support.
Best regards,
Milan Dragojlovic
interlinktrade@mts.rs

[Valsimot]

You will not find RFU file for that printer model because RFU is used in more advanced printers.

If you download .exe firmware from HP.com and exctract the .exe file with 7zip you can get to actual firmware file (named 1013)  located inside .exe    -> M207-M212_Series_FW_Update-20250324\.rsrc\FILE\1013

Is the printer still connected on a network? The 1013 file is the close as RFU file you need to send it to a printer over network.

[mdragojlovic]

Vi ste iz komsiluka, tako da ce te razumeti. Taj printer je radio sasvim normalno u svojoj mrezi. Onda se ukazala potreba da se prebaci na drugu lokaciju. I tu je problem. On je ocigledno ostao zaglavljen u staroj wireless mrezi, i ni na koji nama poznat nacin nismo uspeli da ga resetujemo na fabricko podesavanje i onda jednostavno ukljucimo u novu mrezu. Sve smo pokusali. On ne komunicira sa HP Smart-om, a sve sto smo pokusali sa HP podrskom, nije dalo rezultat.Da li Vi mozda imate ideju? Hvala unapred.

Milan

[Valsimot]

The forum rules dictate that all answers must be in English. I was banned last time when using local language for neighbors.

Wireless setup mode can be used when switching from wireless networks. 
https://support.hp.com/us-en/document/ish_3967769-3956733-16

After the printer is in wireless setup mode within 2 hours you can use your smartphone to add it to a new network.

The blinking amber is an general error. The printer has wired network if you connect it with cable to wired network is the wired network connection established?