iPad/iPhone can not print on 5G (but will print on 2.4G).

[donP3]

My house had DSL (2.4G) in the past, printer (HP7510) works well with iPad and iPhone.

Recently, my house was updated to 5G (fiber). Now my devices (iPad/Iphone) still prints with 2.4G, but will not print with 5G (does not recogmized 5G name). I have two names for 2.4G and 5G.

My WiFi provider claims its the printer not capable of printing 5G with these Apple devices.

Yet my MacBook Air prints on both 2.4G and 5G!!!!

Question...

1. Could this be caused by a router mismatch?

2. I guess it is very possible for the printer is old (?). Do you have software update for a HP7510 printer to print of 5G?

[jabzi]

Hello, 

HP Printer are designed to work only on 2.4GHz band and not on 5GHz.

However you may isolate 2.4GHz and 5GHz in your router settings ( contact your ISP ). Have the printer connected to 2.4GHz SSID and also your other wireless devices to print. 

[MOSHIE14]

Hi donP3,

Thank you for contacting HP Forum.

Please see links below of your concern.  It looks like that HP Printer for now only support 2.4Ghz band wireless.

http://h30434.www3.hp.com/t5/LaserJet-Printing/5g-printer-options/td-p/3962352

http://h30434.www3.hp.com/t5/Inkjet-Printing/HP-Photosmart-7510-All-In-One-Compatablity-with-5-4ghz/...

https://h30434.www3.hp.com/t5/LaserJet-Printing/Wireless-Connection-to-a-5G-Network/m-p/5351615

https://h30434.www3.hp.com/t5/HP-Connected-Mobile-Printing-and-Cloud-Printing/HP-Deskjet-3630-not-co...

[IPGRicky · Accepted solution]

Hi,

This is Ricky. 

Welcome to HP Consumer Support Forum. I am happy to assist you!

Please be informed that our HP printers are designed to work only with 2.4GHz. Hence, Please make sure both IPad / Iphone and the printer is connected to 2.4GHz. So, that they can communicate with each other. 

Please contact 1-800-474-6836 for any assistance. We work 24*7.

Thank you for choosing HP. Have a wonderful day ahead.

Please click the "Thumbs Up", to say thanks for helping!

Also, please consider marking my post as “Accept as Solution" if you feel my post solved your issue.

I am an HP Employee.