• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Is your HP DeskJet 3830 series scanner not working? Here is the solution Click here to view the instructions!
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended

Hello. I'm working with a HP LaserJet M225 MFP Printer that is not responding to commands to copy from the dashboard. 
 I've done both a Hard Reset and updated the firmware. Neither of these things have fixed the issue, however...
Is it possible to get the instructions for an NVRam Reset PMed to me?

 

P.S. I know that a similar problem has already been solved here. The message with the decision was sent in a private message((

 

https://h30434.www3.hp.com/t5/LaserJet-Printing/HP-Laserjet-M225-not-responding-to-copy-commands/td-...

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi @incarne 

 

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

 

If your HP LaserJet M225 MFP is not responding to copy commands despite performing a hard reset and updating the firmware, an NVRAM reset might help. Here are the steps to perform an NVRAM reset:

NVRAM Reset Instructions

Turn Off the Printer

  • Power down the printer and unplug it from the wall outlet.

Disconnect All Cables

  • Remove any USB or network cables from the printer.

Access the NVRAM Reset Mode

  • While the printer is off, press and hold the # and 6 buttons on the control panel.
  • While holding these buttons, plug the printer back into the wall outlet.

Release the Buttons

  • Once the printer powers on, release the # and 6 buttons. The printer will enter NVRAM reset mode.

Complete the Reset

  • Follow any on-screen prompts if they appear. The printer will reset to factory defaults.

Reconnect Cables

  • Once the reset is complete, reconnect any cables you had previously disconnected.

Test the Printer

  • Try to copy a document to see if the issue has been resolved.

 

I hope this helps.

 

Take care and have a good day.

 

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

 

Rachel571

HP Support

.
Sneha_01- HP support

View solution in original post

2 REPLIES 2
HP Recommended

Hi @incarne 

 

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

 

If your HP LaserJet M225 MFP is not responding to copy commands despite performing a hard reset and updating the firmware, an NVRAM reset might help. Here are the steps to perform an NVRAM reset:

NVRAM Reset Instructions

Turn Off the Printer

  • Power down the printer and unplug it from the wall outlet.

Disconnect All Cables

  • Remove any USB or network cables from the printer.

Access the NVRAM Reset Mode

  • While the printer is off, press and hold the # and 6 buttons on the control panel.
  • While holding these buttons, plug the printer back into the wall outlet.

Release the Buttons

  • Once the printer powers on, release the # and 6 buttons. The printer will enter NVRAM reset mode.

Complete the Reset

  • Follow any on-screen prompts if they appear. The printer will reset to factory defaults.

Reconnect Cables

  • Once the reset is complete, reconnect any cables you had previously disconnected.

Test the Printer

  • Try to copy a document to see if the issue has been resolved.

 

I hope this helps.

 

Take care and have a good day.

 

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

 

Rachel571

HP Support

.
Sneha_01- HP support
HP Recommended

Thank you very much! It really works. The device makes copies again and makes copies over the network.
I am extremely grateful

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.