cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix HP Printer issue in macOS

    A [software component] will damage your computer message displays when printing or while installing - Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Note for common printer problems
Customers receiving the"will damage your computer" message along with others like "unable to access cups/tmp" or "'@%' cannot be opened" need to update their version of the macOS. Please check this article for more information: HP Printers - A [software component] will damage your computer message displays when printing or while installing (macOS) .
Highlighted
New member
4 2 0 0
Message 1 of 3
87
Flag Post

Solved!

code # OX61011bed

HP Recommended
HP Officejet 6700 Premium
Microsoft Windows 10 (64-bit)

Just started having issues with printer not always printing. Error message "There is a problem with the printer or ink system. Turn print off, then on. If problem persists contact HP. Ox61011bed "    I put in new blue cartridge. It still prints.but will stop after a print job and show the above message but when I hit the "ok" button I can usually print again. It keeps doing the ink check thing..like back and forth a couple times. Also new message "do not use a power strip or wall switch to shut down. All equipment hooked up separately to a power strip. I use the off button on the printer screen. 

[ps: I know I have Windows 10 but beyond that have no idea and don't know where to look.]

Thanks for any help. Grannie 

2 REPLIES 2
Highlighted
HP Support Agent
HP Support Agent
15,773 15,768 1,068 1,247
Message 2 of 3
Flag Post
HP Recommended

@mel60, Welcome to the HP Support Community!

 

This is an issue with the printhead of the printer. Kindly perform the steps mentioned in this document - 'Printer Failure' Error

 

If the issue persists, please reach out to the HP Support in your region regarding the service options for your printer. 

 

If the printer is out of warranty, I suggest you upgrade the printer. You may visit Hp Store to check the available printers.

 

Keep me posted for any other assistance.

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day! 

KUMAR0307
I am an HP Employee

0 Kudos
Author
New member
4 2 0 0
Message 3 of 3
Flag Post
HP Recommended

Kumar thank you for the directions. I actually had done similar but did all again according to your advice.  There was a Lot of ink at the right end of the carriage. I sopped it up best I could. I believe the issue may be the 'part' at end of carriage that takes the ink from the cartridge. The cartridge is fine with no leaks. Seeing that this unit is out of warranty and per reading looking it up the other day found out that no replacement parts are available anymore.  Thie unit still prints but does stop and reset every so often.  I will start looking for a new unit.  Again, thanks for the assist.

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation