[Software] G7500, G62 & Studio X 4.5.0

[SteffenBaierUK]

Hello all,

We just released the PolyOS SW bundle file

• 4.5.0.432287 (X30, X32, X50, X52, X70, X72, G62, G7500)

Software version: 4.5.0

Release date: May 2025
Custom URL: https://swupdate.lens.poly.com/polyos/4.5.0/432287/

• PolyOS v4.5 SW bundle file (X30, X50, X52, X70,X72, G62, G7500) v4.5-432284,
• PolyOS Lite v1.5 SW (V52, V72) v1.5.0-432284,
• TC8/TC10 v6.5-7001070,
• Studio E70 v1.12.0-550111,
• Studio E60-1.1.3.6,
• IP Mic adapter v3.0.1-410139, IP mic v3.0.0-1133,
• EE Cube build v1.3.1-001267)

 

This feature release of Poly VideoOS is available for all Poly and partner modes.

Poly VideoOS 4.5.0 is a feature release with the following new features, updates, and fixes.

Hardware, connectivity, and configuration features

This release includes the following new hardware support, connectivity, and configuration features:

• Users running Poly VideoOS 4.5.0 and Microsoft Teams Rooms are required to move Android Open Source Project (AOSP) for device management in Teams Admin Center (TAC).

  See Migrating HP Poly Android Microsoft Teams Rooms devices to AOSP.
  
  

• You can enable automatic Poly IP table or ceiling microphone switching on the Poly Studio X72 video bar.

  See Live IP microphone switching on Poly Studio X72.
  
  

• You can now connect up to three IP cameras in Microsoft Teams running Poly VideoOS 4.5.0 on a Poly G62 system or two IP cameras on a Poly Studio X72 video bar.

  See Connect three IP cameras in Microsoft Teams.
  
  

• Improved network switch configuration when connecting modular room peripherals to the Poly Studio G62 LLN port.

  See Improved network switch configuration when connecting modular room peripherals to the Poly Studio G6...
  
  

• The Poly Labs features people on monitors and stationary people are now fully promoted into Poly VideoOS 4.5.0.

  See Poly Labs features people on monitors and stationary people promoted
  
  

Poly TC10 and Poly TC8 touch controller features

This release includes the following new features for Poly TC10 and Poly TC8 touch controllers:

• You can now update the admin password via Poly Lens on a provisioned Poly TC10 touch controller in standalone mode.

  See Provision the administrator password in Poly Lens for a standalone Poly TC10.
  
  

• Motion (proximity) sensor support to wake the system is now available via a standalone Poly TC10 touch controller in Zoom Rooms.

  See Enable motion sensor detection on Poly TC10 for Zoom Rooms.
  
  

• More A/V controls partners on Poly TC10 and Poly TC8 touch controllers.

  See More A/V controls partners on Poly TC10 and Poly TC8 touch controllers

Enhancements and fixes

This release provides many quality-focused enhancements and fixes to resolve customer issues. Notable resolved issues include:

• The system shows a black screen for self-view and for far-end participants on a Poly Studio X52 video bar in a Pexip call (PVENG-29306)
  
  

• PTZ controls and presets in manual mode don't work after switching from multi-stream mode on a Poly G7500 system or Poly Studio X70 video bar with a USB-connected Poly Studio E70 camera (PVENG-28845)
  
  

• Disconnecting the USB-A cable causes the system to restart and sometimes lose network connection on a Poly Studio X52 video bar in Teams mode with a connected USB-extender (PVENG-27738)
  
  

• Touch controller menus display a mix of English and Japanese on a Poly Studio X video bar with a connected Poly touch controller (PVENG-28462)

• Migrating HP Poly Android Microsoft Teams Rooms devices to AOSP
• Live IP microphone switching on Poly Studio X72

  You can enable automatic Poly IP table or ceiling microphone switching on the Poly Studio X72 video bar.
  
  

• Enable motion sensor detection on Poly TC10 for Zoom Rooms

  A Poly TC10 device configured as a Zoom Rooms Controller in either standalone mode or paired with a Poly video system now supports motion (proximity) sensors.
  
  

• Connect three IP cameras in Microsoft Teams

  You can now connect up to three IP cameras in Microsoft Teams running Poly VideoOS 4.5.0.
  
  

• Provision the administrator password in Poly Lens for a standalone Poly TC10

  If you provision your Poly TC10 in standalone mode in Poly Lens, you can update the administrator password in Poly Lens.
  
  

• Improved network switch configuration when connecting modular room peripherals to the Poly Studio G6...

  Configure your network switch to ensure a stable experience with Poly modular room peripherals.
  
  

• Poly Labs features people on monitors and stationary people promoted

  Poly Labs is a collaborative program to deliver pre-released features and experiences to customers.
  
  

• More A/V controls partners on Poly TC10 and Poly TC8 touch controllers

  You can enable control of both call and A/V controls, such as lighting, blinds, and heating, ventilation, and air conditioning (HVAC) systems on Poly TC10 and Poly TC8 touch controllers.

Migrating HP Poly Android Microsoft Teams Rooms devices to AOSP

This guide will detail how administrators can convert existing HP Poly Android MTR endpoints to support Intune Android Open Source Project (AOSP) device management platform. Microsoft is deprecating Android Device Administrator, which uses Company Portal (CP), in favor of AOSP device management.

For more details, see Moving Teams Android Devices to AOSP Device Management on the Microsoft website.

HP Poly has created a mechanism that allows the migration of systems, either individually through the local device WebUI or in bulk through Poly Lens management.

This mechanism only applies to HP Poly Android Teams Rooms. HP Poly Teams panels will be migrated to AOSP automatically with a firmware update without any administrative intervention required.

Device support and firmware details

Microsoft Teams Rooms on Poly Studio X30 Poly Studio X50, Poly Studio X70, Poly Studio X32, Poly Studio X52, Poly Studio X72, Poly Studio G62, and Poly G7500 systems
Teams controller models: Poly TC8 and Poly TC10

Firmware version support:

• • Company Portal (CP) enrollment support will end in a future Poly OS release.

  • Your system must be on Poly VideoOS 4.5.0 to migrate to AOSP.

Steps to migrate from Company Portal to AOSP

1. Ensure Intune is setup to accept enrollment of AOSP devices. Follow the instructions in the Migrating Teams Android Devices to AOSP Device Management from Device Administrator guide.

   1. HP Poly does not currently support any device configuration profiles.

   2. HP Poly does support device compliance policies similar to existing CP enrollment

      1. Minimum/maximum OS Version

      2. Rooted device check

      3. Require encryption of data storage on device

2. Once AOSP device management is enabled and configured in Intune, update to Poly VideoOS 4.5.0 through either Microsoft Teams Admin Center or Poly Lens.

3. Once the firmware update is complete, enable AOSP Authentication from the system web interface.

   1. Access the system web interface and log in with admin credentials.

   2. Select General Setting > Provider.

   3. Select the Enable AOSP Authentication checkbox and select Save.

   4. On the System Restart dialogue box select Restart.

   5. The system monitor displays “Switching Teams Authentication” and then reboots.

   6. Paired Poly TC8 or Poly TC10 controllers will disconnect, reconnect, display “Switching Teams Authentication”, check for new software, and then launch the Teams app.

4. New entries will appear in Intune Admin Portal.

   1. Log in to intune.microsoft.com with the proper credentials for your tenant

   2. Select Device > Android > Android Devices

   3. Search for the name of the device that was converted and confirm it has AOSP Enrollment.

5. On the system or touch controller go to More Settings > Device Settings > About. Make sure the updated components match the following.

   Firmware Version: 4.5.0-432282

   Partner App Verison: 7.0.0-SNAPSHOT

   Authenticator Version: 6.2410.7268

   Microsoft Intune Version: 24.09.1

   Teams Version: 1449/1.0.96.2025031102

   Admin Agent Version: 1.0.0.202412110504.product

Live IP microphone switching on Poly Studio X72

You can enable automatic Poly IP table or ceiling microphone switching on the Poly Studio X72 video bar.

You can configure your system to automatically switch between the in-built microphone and any Poly IP table or ceiling microphones. The system automatically uses the microphone closest to the person speaking. In the system web interface, go to Audio > General Audio Settings > select Enable Auto Mic Switching.

Enable motion sensor detection on Poly TC10 for Zoom Rooms

A Poly TC10 device configured as a Zoom Rooms Controller in either standalone mode or paired with a Poly video system now supports motion (proximity) sensors.

To activate motion detection on a Poly TC10 device, enable it on the Zoom Rooms web portal and set a device operation time. The device operation time specifies the daily schedule of active and idle hours of the Poly TC10 device. The Poly TC10 device dims during times when the Zoom Room is not in use.

Note: The motion detection range is approximately up to 1.5 m (5 ft) maximum from the Poly TC10 device.

Procedure

1. In the Zoom Rooms web portal, go to Rooms Management > Zoom Rooms.
2. Do one of the following:

   • To set all rooms on the account, go to Account Profile > Setup > Device Operation Time.

   • To set a specific room on the account, go to Room Profile > Setup > Device Operation Time.

Enable the following:

• Device Operation Time

• Exit device operation time when motion is detected in the room by Zoom Room device equipped with a motion detection sensor

• Display room occupancy status

When a Poly TC10 room controller detects motion, the Poly TC10 display wakes up and goes from dim to normal brightness, and the room display monitor wakes up.

Connect three IP cameras in Microsoft Teams

You can now connect up to three IP cameras in Microsoft Teams running Poly VideoOS 4.5.0.

You can IP connect three Poly Studio E60 or Poly Studio E70 cameras plus three Poly IP microphones on a Poly Studio G62 system.

You can IP connect two Poly Studio E60 or Poly Studio E70 cameras plus three Poly IP microphones or a single RealPresence Debut expansion microphone on a Poly Studio X72 video bar.

Poly Studio G62 includes one unpowered LLN port that requires a Netgear Pro AV GSM4210PD switch to connect IP devices.

Note: Poly systems don't support mixing USB and IP cameras.

Provision the administrator password in Poly Lens for a standalone Poly TC10

If you provision your Poly TC10 in standalone mode in Poly Lens, you can update the administrator password in Poly Lens.

Note the following:

• The Poly touch controller administrator login credentials are stored in an encrypted manner in Poly Lens. They’re never logged in plain text in Poly Lens.

• The login credentials are transmitted to the device over an encrypted TLS connection.

Once you provision a standalone device's administrator password in Poly Lens, the Change Password button under Credentials in the web interface is disabled, and users are not prompted to change their password in the future.

Procedure

1. In Poly Lens, go to Device Inventory and select your device.
2. Go to Settings > Security > Local Accounts.

Enter the new room password and select Apply. A message displays confirming that the change was successful.

Improved network switch configuration when connecting modular room peripherals to the Poly Studio G62 LLN port

Configure your network switch to ensure a stable experience with Poly modular room peripherals.

Make sure you have the following equipment:

• Laptop with an Ethernet port

• Ethernet patch cable

• Netgear ProAV M4250-9G1F-PoE+ (GSM4210PD) network switch

Note: This release doesn't support automatic network switch configuration.

Note: Connect all your peripherals to the system before you configure the switch.

Note: Ensure that your network switch is updated to firmware version 13.0.5.10. For information on updating your Netgear switch and Ethernet settings, see here Netgear Support.

Procedure

1. Turn on the network switch and connect the Ethernet patch cable to your laptop and the port labeled OOB on the back of the switch.
2. Log in to the administrator page of your network switch, go to Configure and select Poly StudioNet Modular Room Switch.
3. Select the ports you wish to apply the profile to and select Tag all > Apply.
4. Once complete, you can close the web browser and disconnect the Ethernet cable connected to your computer and the switch.

Poly Labs features people on monitors and stationary people promoted

Poly Labs is a collaborative program to deliver pre-released features and experiences to customers.

This following Poly Labs features are fully promoted and enabled in Poly VideoOS 4.5.0:

• People on monitor filter - Refines Poly DirectorAI smart camera technology by excluding participants displayed on monitors during multi-camera or multi-display setups.

• Stationary people filter - Refines Poly DirectorAI smart camera technology by excluding stationary objects from framing, focusing solely on active participants.

For further information on Poly Labs, see here GUID-8A52B80B-E614-4411-BBC2-09A7E24F816A.html.

More A/V controls partners on Poly TC10 and Poly TC8 touch controllers

You can enable control of both call and A/V controls, such as lighting, blinds, and heating, ventilation, and air conditioning (HVAC) systems on Poly TC10 and Poly TC8 touch controllers.

Poly supports Crestron and QSC Q-sys in addition to Extron and Lightware as compatible vendors with a mechanism to bypass authentication. Other vendors are operable and might require an authentication step on the touch controller.

For more information, review the Poly A/V Control Administrator Guide.

Partner application updates

This release includes and is tested with the following partner application versions.

Table 1. Partner application updates

Partner application	Version	Features
Microsoft Teams Rooms	Admin Agent: 1.0.0.202412110504.product Teams: 1449/1.0.96.2025031102 Company Portal: 5.0.6061.0	Maintenance release For more information on this Microsoft Teams Room release, visit the Microsoft Teams Rooms website.
Zoom Rooms	Zoom Rooms: 6.3.5.6258 Zoom Rooms Controller (TC8 / TC10): 6.3.5	Maintenance release. For more information on this Zoom Room release, visit the Zoom website.
Google Meet	2024.1229.00.00	Maintenance release.
Ring Central	25.1.30.12	Maintenance release. For more information on Ring Central, visit the Ring Central website.
Tencent Meeting Rooms	Rooms: 3.30.320.550 Controller: 3.21.250.570	Maintenance release. For more information on this Tencent release, visit the Tencent website.
Dialpad	1.028.1-0-gd5e4a6d	Maintenance release. For more information on this Dialpad release, visit the Dialpad website.
LogMeIn	1.219.11	Maintenance release. For more information on this LogMeIn release, visit the LogMeIn website.
BlueJeans	N/A	BlueJeans is no longer supported. After updating to Poly VideoOS 4.2.0, systems that are still using BlueJeans automatically revert to Poly Video mode.

Updating your system

All Poly G7500, Poly Studio G62, and Poly Studio X systems support Poly VideoOS 4.5.0.

Poly recommends that you configure your device to automatically restart on a weekly or daily basis. This feature can help systems run optimally and efficiently to reduce crashes that some configurations have experienced in the past. Configure this feature in the system web interface under General Settings > System Settings > Enable Scheduled Auto Restart.

For a list of supported 3.x versions for each system, review the Poly VideoOS 3.14.2 Release Notes.

• Updating Poly G7500, Poly Studio G62, or Poly Studio X

  Update your Poly G7500, Poly Studio G62 or Poly Studio X Series system to the latest release.

• Updating Poly TC10 or Poly TC8 touch controllers

  Update your Poly TC10 or Poly TC8 touch controller to the latest release.

Updating Poly G7500, Poly Studio G62, or Poly Studio X

Update your Poly G7500, Poly Studio G62 or Poly Studio X Series system to the latest release.

Note the following before you update:

• Poly Studio X32 initially ships with Poly VideoOS 4.2.6 software, which you can’t downgrade to a previous release.

• Poly Studio G62 initially ships with Poly VideoOS 4.1.5. Poly strongly encourages you to update your system as part of the out-of-box setup process.

• Poly Studio X52 initially ships with Poly VideoOS 4.1.0 software, which you can’t downgrade to a previous release.

• Poly Studio X72 initially ships with Poly VideoOS 4.2.5 software, which you can’t downgrade to a previous release.

• You can downgrade your Poly G7500 or Poly Studio X Series systems (except Poly Studio X32, Poly Studio X52, and Poly Studio X72) to previous Poly VideoOS 4.x versions.

• Downgrading from Poly VideoOS 4.x to Poly VideoOS 3.x versions isn’t supported.

• Your system must be running Poly VideoOS 3.14.1 or later before updating. If your system is running software earlier than Poly VideoOS 3.14.1, you must first update your system to Poly VideoOS 3.14.1 or later. Updating to this release without first upgrading to 3.14.1 or later isn’t supported, as it’s an untested upgrade path that may result in your system not functioning correctly.

Updating Poly TC10 or Poly TC8 touch controllers

Update your Poly TC10 or Poly TC8 touch controller to the latest release.

You have multiple options for updating your system. For more information, review the Poly Video Mode Administrator Guide or the Poly Partner Mode Administrator Guide.

Note the following before you update:

• Updating your Poly TC10 or Poly TC8 touch controller to Poly TCOS 4.1.0 or later includes a major platform upgrade to Android 11. Once updated, you can’t downgrade the touch controller.

• Update your Poly TC10 or Poly TC8 touch controller to the latest software (if prompted) during the out-of-box experience to avoid sync issues when pairing with a Poly G7500, Poly Studio G62, or Poly Studio X Series system.

Resolved issues in Poly VideoOS 4.5.0

Note:

Starting with VideoOS 4.3.1, issue IDs have the format PVENG-XXXXX. If you’re tracking an issue with an ID in the old format (EN-XXXXXX), you can still use the EN number to reference your issue when you contact Poly Support.

These release notes may not list all the issues that the team has fixed, User Experience updates, performance improvements, and upgrades. The information reflects the status at the time of release and may change without notice.

Resolved issues in this release take effect once you update your system.

Table 1. Resolved issues

Category	Issue ID	Description
Camera	PVENG-29597	On a Poly Studio X72 video bar in Poly Video mode, the system intermittently fails to display the built-in camera content.
Camera	PVENG-29306	On a Poly Studio X52 video bar in a Pexip call, the system shows a black screen for self-view and for far-end participants.
Camera	PVENG-28890	On a Poly Studio X video bar, after switching from a Teams to a Zoom call, camera tracking doesn't default back to what was set before the meeting.
Camera	PVENG-28845	On a Poly G7500 system or Poly Studio X70 video bar with a USB-connected Poly Studio E70 camera, PTZ controls and presets in manual mode don't work after switching from multi-stream mode.
Device Management	PVENG-29652	On a Poly Studio X video bar or system with camera-related issues, sometimes excessive log file output shows.
Device Management	PVENG-28183	On a Poly G7500 system connected via a Fully Qualified Domain Name (FQDN) address, you can't view the local camera image for remote monitoring.
Device Management	PVENG-27738	On a Poly Studio X52 video bar in Teams mode with a connected USB-extender, disconnecting the USB-A cable causes the system to restart and sometimes lose network connection.
Device Management	PVENG-23418	On a Poly Studio X70 video bar in Zoom Rooms, logs and timestamps are inconsistent.
Partner Application	PVENG-28853	On a Poly Studio G62 system or a Poly Studio X52 video bar in Tencent mode, the sign-in code is invalid.
Peripherals	PVENG-29132	On a Poly Studio X video bar with a connected Poly touch controller, calendar widgets show in English though set to German.
Peripherals	PVENG-28827	On a Poly TC8 touch controller connected to an Extron application running A/V controls, the error 'Failed to launch A/V Controls' sometimes shows.
Peripherals	PVENG-28462	On a Poly Studio X video bar with a connected Poly touch controller, menus display a mix of English and Japanese.
Peripherals	PVENG-28141	On a Poly Studio X52 video bar with a connected Poly TC10 touch controller, the touch controller doesn't show all contacts.
Peripherals	PVENG-27663	On a Poly G7500 system with a connected Poly TC10 touch controller in Tencent mode, the touch controller pairs but displays a 'Loading the conference information' message.
Provisioning	PVENG-27737	On a Poly G7500 system, Organizational Unit (OU) and Organization (O) fields in SCEP settings don't accept the dash character.

Known issues in Poly VideoOS 4.5.0

Review the known issues in this release.

Note:

These release notes don’t provide a complete listing of all known issues for the software. Issues not expected to significantly impact customers with standard voice and video conferencing environments may not be included. In addition, the information in these release notes is provided as-is at the time of release and is subject to change without notice.

This known issues table only includes issues discovered during this release. For known issues in the previous release, visit Known issues in Poly VideoOS 4.4.3.

Table 1. Known issues

Category	Issue ID	Description	Workaround
Audio	VOICE-77624	On a Poly Studio X70 video bar with a Poly Trio C60 phone paired as an audio device, the far end may hear audio clipping.	No workaround.
Audio	PVENG-9176	On a Poly Studio X52 video bar with a connected Samsung monitor, the TV Speakers option doesn’t work.	Use the Poly Studio X52 video bar speakers.
Audio	PVENG-21018	On a Poly Studio X72 in Device Mode, the system makes a popping sound when you exit Device Mode using the touch controller.	No workaround.
Camera	PVENG-30444	On a Poly Studio X52 video bar in a SIP or H.323 call, video and content drops intermittently and sometimes the system restarts.	No workaround.
Camera	PVENG-8496	Selecting Disable All USB Ports on the Poly Studio X70 video bar disconnects the camera.	No workaround.
Camera	PVENG-20463	On a Poly Studio X50 video bar in an inverted configuration, sometimes speaker framing doesn't detect the speaker.	Poly Studio X50 is designed to be upright whether mounted above or below the monitor. Mount the Poly Studio X50 in the upright position.
Configuration	EN-243770 PVENG-6386	On a Poly Studio X video bar in Poly Video Mode with no monitor connected, the device fails to work.	Connect any monitors, cameras, or peripherals before starting the system.
Device management	PVENG-30194	On a Poly Studio G62 system with a connected PoE+ class 4 injector or Ethernet switch, sometimes the system will restart due to insufficient power.	Use a PoE++ class 5 injector or Ethernet switch.
Device management	PVENG-25311	On a Poly Studio X video bar in Microsoft Teams or Zoom Rooms mode in a Webex Direct Guest Join call, content may not show to the far end due to the Webex call requiring 180fps video.	No workaround.
Device management	PVENG-25562	On a Poly Studio X52 system, the message that an administrator is requesting to capture diagnostic video doesn't appear on the touch controller.	Use the system web interface or Poly Lens to restart the system.
Device management	PVENG-25545	If you capture a snapshot during a content sharing session and end the session with the snapshot displayed, the system remains awake and doesn't enter sleep mode.	Start and end another call.
Device management	PVENG-25544	On Poly Studio G62 system, disabling all USB ports doesn't work.	No workaround.
Device management	EN-240753 PVENG-7684	On a Poly Studio X video bar in Teams mode with a connected Poly TC8 touch controller, the system may show as offline in Teams admin center and unpair with the controller.	Restart the system and enable the daily or weekly Scheduled Auto Restart feature.
Partner application	EN-233295 PVENG-8425	On a Poly Studio X70 video bar with a connected Poly Studio E70 camera in Zoom mode, switching the Poly Studio E70 camera and enabling Smart Gallery may result in the system defaulting back to the built-in camera.	Use one of the other available tracking modes, including manual, speaker focus, or autoframing.
Partner application	EN-202446 PVENG-9005	On a Poly Studio X video bar in Teams mode, the PAC file instruction isn’t correctly utilized to bypass the proxy.	Use the (dnsDomainIs(host, "local.example.com") function instead of an IP based (isInNet(dnsResolve(host), "ip_address", "IP_address_pattern_mask") function.
Peripherals	PVENG-28607	On a Poly X50 video bar with a connected Poly TC8 touch controller on a Pexip call, the touch controller screen sometimes goes white and becomes unresponsive.	Restart the system.
Peripherals	PVENG-25765	On a Poly TC10 device, the time doesn't change after changing the time zone.	Reboot the Poly TC10 device.
Peripherals	PVENG-24976	On a Poly TC10 or Poly TC8 device, an incorrect IP address displays.	Sign in to the touch controller as administrator.
Peripherals	PVENG-20689	On a Poly Studio X72 system connected to a Dell touch screen monitor, touching the monitor doesn't wake up the system.	Use a connected Poly touch controller or remote control to wake the system.
Peripherals	PVENG-12655	On Poly Studio X70, after you power cycle the system, the connected Poly TC8 device is forced to pair again after one minute.	Wait for the Poly TC8 device to pair to the system.
Peripherals	EN-238525 PVENG-9141	On a Poly G7500 system, the device doesn’t connect using Miracast.	Restart the system and wireless connection.
Peripherals	EN-182043 PVENG-9924	On a Poly Studio X50 video bar in Poly Video Mode with a connected Poly TC8 touch controller, you can’t see incoming call notifications when the device displays the Camera or Settings screen.	When the front of room monitor displays the active call message, close the Camera or Settings screens to answer the call.
Provisioning	PVENG-24585	On a PolyTC10 device, the Poly Lens QR code doesn't appear during out of box setup.	Register your system to Poly Lens Cloud after out of box setup using the system web interface.
Provisioning	EN-248675 PVENG-20443	On a Poly G7500 or Poly Studio X system, the device doesn’t connect via Wi-Fi and Cisco Access Points after a system update.	Disable Adaptive FT (Fast Transition) in Cisco Access Points.

Supported peripherals and applications

From our Video FAQ:

Aug 13, 2024 Question: Is there a guide or overview for supported and compatible peripherals for a G62, G7500, or Poly Studio X family, and what Provider or Partner Mode are these supported?

Resolution: Please check >here<

NOTE: The above includes the Poly and partner peripherals and applications supported on Poly G7500, Poly Studio G62, and Poly Studio X video bars. Not all the hardware listed is compatible with all provider modes. The above reflects hardware compatibility and not provider configuration compatibility.

Older releases:

• Older 4.4.3 release >here<
• Older 4.4.2 release >here<
• Older 4.4.1 release >here<
• Older 4.4 release >here<
• Older 4.3.3 release >here<
• Older 4.3.2 release >here<
• Older 4.3.1 release >here<
• Older 4.3.0 release >here<
• Older 4.2.2 release >here<
• Older 4.2 release >here<
• Older 4.1.4 release >here<
• Older 4.1.3 release >here<
• Older 4.1.2 release >here<
• Older 4.1.1 release >here<
• Older 4.1.0 GA2 release >here<
• Older 4.1.0 release >here<
• Older 4.0.2 release >here<
• Older 4.0.1 release >here<
• Older 4.0 release >here<
• Older 3.14.2 release >here<
• Older 3.14.1 release >here<
• Older 3.14.0 release >here<
• Older 3.13.0 release >here<
• Older 3.12.0 release >here<
• Older 3.11.0 release >here<
• Older 3.10.0 release >here<
• Older 3.9.1 release >here<
• Older 3.9.0 release >here<
• Older 3.8.0 release >here<
• Older 3.7.0 release >here<
• Older 3.6.0 release >here<
• Older 3.5.0 release >here<
• Older 3.3.4 release >here<
• Older 3.3.2 release >here<
• Older 3.3.1 release >here<
• Older 3.3 release >here<
• Older 3.2.3 release >here<

• Poly Studio G62 supported peripherals by provider

  Poly Studio G62 supports multiple cameras, audio peripherals, and controllers.
  
  

• Poly G7500 supported peripherals by provider

  Your Poly G7500 supports multiple cameras, audio peripherals, and controllers.
  
  

• Poly Video Mode on Poly Studio X systems supported peripherals

  Poly Studio X in Poly Video Mode supports multiple camera and audio peripherals.
  
  

• Poly Device Mode on Poly Studio X systems supported peripherals

  When using Poly Device Mode as a provider, you can connect camera and audio peripherals to your system.
  
  

• Teams Rooms on Poly Studio X systems supported peripherals

  The following topics list supported peripherals for Microsoft Teams Rooms on Poly Studio X70, Poly Studio X52, Poly Studio X50, and Poly Studio X30 .
  
  

• Zoom Rooms on Studio X systems supported peripherals

  The following topics list supported peripherals for Zoom Rooms on Studio X70, Studio X52, Studio X50, and Studio X30.
  
  

• Google Meet on Studio X systems supported peripherals

  The following topics list supported peripherals for Google Meet on Studio X70, Studio X52, Studio X50, and Studio X30
  
  

• Tencent Meeting Rooms on Studio X systems supported peripherals

  The following topics list supported peripherals for Tencent Meeting Rooms on Studio X70, Studio X52, Studio X50, and Studio X30
  
  

• RingCentral on Studio X systems supported peripherals

  The following topics list supported peripherals for Ring Central on Studio X70, Studio X52, Studio X50, and Studio X30.
  
  

• GoToRoom on Studio X systems supported peripherals

  The following topics list supported peripherals for GoToRoom on Studio X70, Studio X52, Studio X50, and Studio X30.
  
  

• Dialpad on Studio X systems supported peripherals

  The following topics list supported peripherals for Dialpad

!!! Please feel free to leave comments !!!

 

[nlev]

Wow! Didn't expect to see this in May since Microsoft listed it as delayed until June. Thanks!